TM 5-3810-293-20P
(3) STOCK NUMBER column.
(1) STOCK NUMBER column.
This
This
column lists the NSN by National item identification
column lists the NSN for the item.
(4) FSCM column. The Federal Supply
number (NIIN) sequence. The NIIN consists of the last
NSN
nine
Code for Manufacturer (FSCM) is a 5-digit numeric code
used to identify the manufacturer, distributor, or
digits of the NSN (i.e., 5305-01-674-1467.) When using
Government agency, etc., that supplies the item.
(5) PART NUMBER column. Indicates the
NIIN
primary number used by the manufacturer (individual,
this column to locate an item, ignore the first 4 digits of
firm, corporation, or Government activity), which controls
the NSN. However, the complete NSN should be used
the design and characteristics of the item by means of its
when ordering items by stock number.
engineering drawings, specifications standards, and
(2) FIG. Column. This column lists the
inspection requirements to identify an item or range of
number of the Figure where the item is identified/located.
items.
The figures are in numerical order in Section II and
Section III.
5.
Special Information.
(3) ITEM column.
The item number
Use the following subparagraphs as applicable:
identifies the item associated with the figure listed in the
adjacent FIG. column. This item is also identified by the
USABLE ON CODE. Not applicable.
a.
NSN listed on the same line.
b. FABRICATION INSTRUCTIONS.
Bulk
b. PART NUMBER INDEX. Part numbers in
materials required to manufacture items are listed in the
this index are listed by part number in ascending
Bulk Material Functional Group of this RPSTL. Part
alphanumeric sequence (i.e., vertical arrangement of
numbers for bulk materials are also referenced in the
letter and number combination which places the first
description column of the line item entry for the item to
letter or digit of each group in order A through Z, followed
be manufactured/fabricated. Detailed
fabrication
by the numbers 0 through 9 and each following letter or
instructions for items source codes to be manufactured
digit in like order.)
or fabricated are found in TM 5-3810-293-14&P-1, TM 5-
(1) FSCM column. The Federal Supply
3810-293-14&P-2, TM 5-3810-293-14&P-3.
Code for Manufacturer (FSCM) is a 5 digit numeric code
used to identify the manufacturer, distributor, or
c. ASSEMBLY INSTRUCTION.
Detailed
Government agency, etc., that supplies the item.
assembly instructions for items source coded to be
(2) PART NUMBER column. Indicates the
assembled from component spare/repair parts are found
primary number used by the manufacturer (individual,
in TM 5-3810-293-14&P-1, TM 5-3810-293-14& P-2, TM
firm, corporation, or Government activity), which controls
5-3810-293-14&P-3. Items that make up the assembly
the design and characteristics of the item by means of its
are listed immediately following the assembly item entry
engineering drawings, specifications standards, and
or reference is made to an applicable figure.
inspection requirements to identify an item or range of
items.
d. KITS. Line item entries for repair parts kits
(3) STOCK NUMBER column.
This
appear in group 9401 in Section II.
column lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and
e. INDEX NUMBERS. Items which have the
FSCM columns to the left.
word BULK in the figure column will have and index
(4) FIG. column. This column lists the
number shown in the item number column. This index
number of the figure where the item is identified/located
number is a cross-reference between the National Stock
in Section II and III.
Number/Part Number Index and the bulk material list in
(5) ITEM column. The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
ASSOCIATED PUBLICATIONS.
The
f.
publications listed below pertain to the Crane and its
FIGURE AND ITEM NUMBER INDEX.
c.
components:
(1) FIG. column. This column lists the
Publication
Short Title
number of the figure where the item is identified/located
TM 5-3810-293-34P
Crane
in Section II and III.
TM 5-3810-293-14&P-1
Crane
(2) ITEM column. The item number is that
TM 5-3810-293-14&P-2
Crane
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
4
