TM 5-3810-295-34
1 Cap screw
13 Pin (2)
25 Shim
37 Packing
2 Lock washer (2) 14 Nut (2)
26 Shim
38 Bearing
3 Shield
15 Spring bolt
27 Shim
39 Spacer
4 Pipe spacer (2) 16 Nut (2)
28 Washer (2)
40 Adjusting bolt (2)
5 Retainer
17 Release rod
29 Male elbow
41 Jam nut (2)
6 Cap screw (2)
18 Brake shoe bracket
30 Tube assembly
42 Bracket (2)
7 Lock washer (2) 19 Brake shoe bracket
31 Bracket
43 Capscrew (4)
8 Eye bolt (2)
20 Nut
32 Grease fitting
44 Piston
9 Nut (2)
21 Lock washer
33 Brake sheave
45 Retainer
10 Spring seat
22 Bushing
34 Brake shaft
46 Spring
11 Spring
23 Cap screw (6)
35 Bearing
47 Cylinder
12 Spring seat
24 Brake lining (2)
36 Retainer
48 Bleeder fitting
Figure 5-12.
Swing brake shaft assembly exploded view.
d. Remove screws (6), lock washers (7) and eye
e. Remove nuts (14) and spring bolt (15), and
bolts (8). Remove nuts (9), spring seat (10), spring (11),
loosen nuts (16) so that rod (17) can be unscrewed from
spring seat (12) and pins (13).
brake shoe bracket (18).
5-24
