TM 5-3810-300-24 & P2
4.
Disassemble Differential Case and Gear Assembly.
A.
If original identification marks are not clear, mark
differential case halves with a punch or chisel for
correct alignment on reassembling.
B. Cut lock wire, if used, remove bolts and separate case halves.
C. Remove spider, pinions, side gears and thrust washers.
D. If necessary, remove rivets and separate gear and case.
REMOVE GEAR RIVETS.
1.
Carefully center punch rivets in center of head.
2.
Use drill 1/32" smaller than body of rivet to drill
through head.
3.
Press out rivets.
4-268