SECTION II
CONTROLS AND OPERATION
44. LEVEL. Check the level of the machine with this gauge.
An electrical overload will cause a breaker to trip. Reset the
circuit breaker and continue operation. The circuit breaker
45. SWING LOCK SWITCH. Move switch toward operator
contains a trip-free feature which allows its contacts to
to engage the 360 swing lock. Move switch away from
open even it the breaker is manually hold in the reset posi-
operator to disengage swing lock.
tion against an overload. If the circuit breaker should trip
shortly after it is reset. check the circuit protected by the cir-
cuit breaker for the cause of the overload.
TA5015640
Figure 2-2. Load Weighing System
2-5
Change 1