TM5-3810-305-10
Rail Transport
Prepare
the LRT 110 Crane for rail transport as follows:
1.
2.
3.
4.
Weight of the hook block is
approximately 235 lb (107 kg).
Use adequate lifting equipment
and properly support the hook
block. Do not lift over personnal
or let personnel walk underneath
suspended. Failure to follow this
procedure could cause DEATH
or serious injury.
Using hoist and sling, remove the hook block
from cable. Store it in the tool box and block
it to prevent it from moving.
Retract the boom and lower it over the front.
Wind cable back on drum, and wire socket
down to prevent cable from loosening on
winch drum.
Install a 1/2 in. 6x19 IWRC cable around load
sheave and hook block tieback.
Refer to TM55-3810-165-14 Transportability
Guidance for the Crane, 7.5 Toni Rough
Terrain. Koehring, Type 1, {NSN 3810=01-
165-0646}, Type 2, {NSN 3810-01-165-0467}
and the shipping data plates for tiedown
requirements.
5. Place the fuel shut-off on the rear wall of cab
6.
7.
in the off position. Put the transmission shift
lever in center (neutral) position, and release
the parking brake
Remove all loose tools and equipment from
the operator’s cab. Stow and secure all tools
and equipment in the tool box.
Band the tool and battery box lids shut.
5-49
