TM5-3810-305-10
Section V
Power and Utility Requirements
* *NOT APPLICABLE**
Section VI
Environmental Requirements
**NOT APPLICABLE**
Section VII
List of Items Furnished
Hook Block: A 10-ton single-sheave hook block
Boom Lenght Markers: Boom length markers
is provided with swivel hook and safety latch.
are located on both sides of the inner boom to
Sheaves comply with SAE J-881. The weight of
indicate retraced length of 21.75 ft (6.63 m) or a
the hook block provides adequate overhaul of the
fully extended boom length of 35.75 ft (10.90 m)
cable, insuring smooth cable operation of the hy -
and are used in conjunction with Capacity Chart.
draulic winch.
Cable; A l/2-inch diameter, 6 x 19 class cable
of right regular lay, having an independent wire
rope core and constructed of improved plow
steel, is provided, having a 3.5:1 safety factor in
accordance with SAE J-959. The winch drum
capacity is such that when the crane is properly
reeved, three wraps of cable are maintained at all
times on the hoist drum.
Boom Angle Indicator: A mechanical boom
Figure 1-8. Boom Lenght Marker
angle indicator conforming to SAE J375 is
provided for angular boom elevations.
Section Vlll
List of Items Required
**NOT APPLICABLE**
Section IX
Storage Data
LRT 110 Cranes being placed in storage must be
30 days or less. Extended Storage is defined as
adequately protected from deterioration during
more than 30 days.
extended periods of idleness. Proper protection
insures that the crane can be restored to service
NOTE
with minimum effort.
For a complete list of storage instruc-
What specific preparation procedures are re-
tions for the LRT 110 Crane, refer to
quired depends upon the length of time the crane
Koehring Commercial Maintenance
is to be stored. Short Term Storage is defined as
Instructions.
1-24
