TM 5-3810-305-23
0054
DISASSEMBLY
1.
Position radiator on suitable work surface and remove two capscrews (Figure 10, Item 6), drain valve
(Figure 10, Item 5), eight capscrews (Figure 10, Item 8), washers (Figure 10, Item 9), brackets
(Figure 10, Items 3 and 7), and oil cooler (Figure 10, Item 1) from radiator.
2.
Remove plug (Figure 10, Item 4) and overflow tube (Figure 10, Item 2), if necessary, for repair of radiator.
END OF TASK
CLEANING
1.
Clean parts IAW General Maintenance Instructions (WP 0162).
2.
Clean radiator interior and exterior with water and dry with compressed air.
3.
Cap oil cooler ports to prevent contamination. Clean exterior with water and dry with compressed air.
4.
Clean all other parts.
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect hoses for deterioration.
3.
Inspect radiator for leaks in seams and tubes.
4.
Inspect all other parts.
END OF TASK
ASSEMBLY
1.
If removed, install overflow tube (Figure 10, Item 2) and plug (Figure 10, Item 4) from radiator.
2.
Install oil cooler (Figure 10, Item 1), brackets (Figure 10, Items 3 and 7), eight washers (Figure 10, Item 9),
capscrews (Figure 10, Item 8), drain valve (Figure 10, Item 5), and two capscrews (Figure 10, Item 6) to radiator.
0054-10
03/15/2011Rel(1.8)root(maintwp)wpno(M00060)
