TM 5-3810-305-23
0131
REMOVAL - Continued
7.
Remove nut (Figure 5, Item 2) and washer (Figure 5, Item 3) from pivot shaft (Figure 5, Item 7) on wiper
motor (Figure 5, Item 6).
8.
Remove pivot shaft link (Figure 5, Item 4) from pivot shaft (Figure 5, Item 7).
9.
Remove three bolts (Figure 5, Item 5) from bracket (Figure 5, Item 1) and wiper motor (Figure 5, Item 6).
10.
Remove wiper motor (Figure 5, Item 6) from vehicle.
11.
Remove bracket (Figure 5, Item 1) from vehicle.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect plastic insert and replace, if necessary.
END OF TASK
INSTALLATION
1.
Position bracket (Figure 5, Item 1) on vehicle.
2.
Position wiper motor (Figure 5, Item 6) on vehicle.
3.
Install three bolts (Figure 5, Item 5) to bracket (Figure 5, Item 1) and wiper motor. Tighten bolts.
4.
Install pivot shaft link (Figure 5, Item 4) to pivot shaft (Figure 5, Item 7).
5.
Install washer (Figure 5, Items 3 and 8) and nut (Figure 5, Item 2) to pivot shaft (Figure 5, Item 7). Tighten nut.
0131-6
03/15/2011Rel(1.8)root(maintwp)wpno(M00147)
