TM 5-3810-306-10
TABLE 3-1. OPERATOR TROUBLESHOOTING (CONTD)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
31. JACK CYLINDER RETRACTS UNDER LOAD
Step 1.
Outrigger system malfunction.
a. Contact Organizational Maintenance.
32. JACK CYLINDER EXTENDS WHILE MACHINE IS TRAVELING
Step 1.
Outrigger system malfunction.
a. Contact Organizational Maintenance.
33. OUTRIGGER SYSTEM WILL NOT ACTIVATE
Step 1.
Hydraulic oil low.
a. Check hydraulic oil level. If ok, do step 2.
b. Fill hydraulic reservoir. Refer to LO 5-3810-306-12.
Step 2.
Outrigger system malfunction.
a. Contact Organizational Maintenance.
34. OUTRIGGER SYSTEM ACTIVATES, BUT SELECTED OUTRIGGER WILL NOT RETRACT OR EXTEND AND
LOWER AS DESIRED
Step 1.
Outrigger system malfunction.
a. Contact Organizational Maintenance.
35. OUTRIGGERS WILL NOT SET
Step 1.
Improper sequence of activation.
a. Activate individual control switch; then activate EXTEND/RETRACT switch.
3-17
