TM 5-3810-306-10
TROUBLESHOOTING TABLE
INTRODUCTION
a.
The table lists the common malfunctions which
you
may
find
during
the
operation
or
maintenance of the Container Crane or its
components. You should perform the tests/
inspections and corrective actions in the order
listed.
b.
This manual cannot list all malfunctions that may
occur, nor all test or inspections and corrective
actions. If a malfunction is not listed or is not
corrected by listed corrective actions, notify your
supervisor.
TABLE 3-1. OPERATOR TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
ENGINE WILL NOT CRANK OR CRANKS SLOWLY
Step 1.
Hydraulic pump engaged.
a. Check position of hydraulic pump disconnect lever. If pump disengaged, do step 2.
b. Disengage hydraulic pump.
Step 2.
Starting circuit connections loose or corroded.
a. Inspect connections at starting motor. If tight and corrosion free, do step 3.
b. Clean and tighten connections.
Step 3.
Battery charge low.
a. Contact Organizational Maintenance to charge/service batteries.
2.
ENGINE HARD TO START OR WILL NOT START - EXHAUST SMOKE PRESENT
Step 1.
Starting aid needed for cold weather.
a. Use cold weather starting aid. If engine does not start do step 2.
Step 2.
Intake air system restricted.
a. Inspect air cleaner inlet hood. If ok, do step 3.
3-3
