TM 5-3810-306-20
DOOR LATCH ASSEMBLY REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
Wire brush
SUPPLIES:
Rust prohibitive paint (Item 68, Appendix C)
Lockwashers (Item 2, Appendix C) (4 Required)
Lockwashers (Item 7, Appendix C) (2 Required)
EQUIPMENT CONDITIONS: None
DISASSEMBLY:
1.
DISASSEMBLE DOOR LATCH ASSEMBLY.
a.
Remove two washers (13 and 11) securing
extension rod (14) to handle (3).
b.
Remove two hex nuts (1), lockwashers (2) and
capscrews (4) and remove handle (3) from door.
Discard lockwashers (2).
c.
Remove four screws (7) and lockwashers (8)
securing latch (9) to door mounting bracket (10).
Discard lockwashers (8).
d.
Remove two washers (12 and 15) securing
extension rod (14) to handle (6).
e.
Remove inside handle (6) from latch (9) by
removing two machine screws (5).
2.
INSPECT ALL PARTS FOR DAMAGE. REPLACE
IF NECESSARY.
3.
REMOVE
ANY
RUST
AND
REPAINT
AS
REQUIRED. (REFER TO TM 43-0139.)
REASSEMBLY:
1.
REASSEMBLE DOOR LATCH ASSEMBLY.
a.
Install inside handle (6) to latch (9) and secure
with two machine screws (5).
15-7
