TM 5-3810-306-20
INSTALLATION:
1.
INSTALL WINDOW GLASS (1).
WARNING
Eye
contact
with
silicone
RTV
materials may cause irritation. If eye
contact takes place, flush eyes with
water for fifteen minutes and have
eyes examined by a doctor.
a.
Cut molding (2) to size.
b.
Install molding (2) on channel (3) of window
opening.
c.
Fit glass (1) in glass channel of molding (2) and
work glass (1) around molding (2) until seated.
d.
Seat locking strip on molding (2) to secure glass
from outside of cab.
e.
Apply silicone sealant at joint where molding
ends meet. Allow to dry and test for leaks.
END OF TASK
15-4
