TM 5-3810-307-10
The following paragraphs provide a general description of each ATEC technical manual.
TM 5-3810-307-10 - Operator's Manual. Contains general theory of operations, operator safety,
instructions for driving and operating the crane, operator troubleshooting, and operator
maintenance. The manual also contains appendices for:
(1)
APPENDIX A.
References - Forms and Publications,
(2)
APPENDIX B.
Components of End Item and Basic Issue Items List (COEI/BII),
(3)
APPENDIX C.
Additional Authorization List (AAL),
(4)
APPENDIX D.
Expendable/Durable Supplies and Materials List (EDSML),
(5)
Load Chart,
(6)
APPENDIX F.
Location/Description of Signs/Decals/Data Plates,
(7)
APPENDIX G.
Load Moment Indicator (LMI) Operator's Handbook,
(8)
(Berminghammer),
(9)
APPENDIX I.
Determination of ATEC Weight Distribution,
(10)
Transportability Guidance,
(11)
Winterizing the ATEC Crane,
(12)
APPENDIX L.
Instructions for Installation/Operation of Pile Driver (Linkbelt),
(13)
Lubrication,
(14)
Alphabetical Index.
TM 5-3810-307-24-1 - Maintenance Manual with Supplemental Data. This manual consists of
two volumes: Volume one is the basic service manual and Volume two is the Service
Maintenance (SM) packages.
Volume one, the service manual, is divided into chapters and sections. Chapter One
contains general maintenance information, preventive maintenance, lubrication, and
troubleshooting. Chapter Two covers specific vehicle component removal/replacement
procedures. Where vehicle components are repairable, the replacement procedure may refer to
an SM package for repair. The Maintenance Allocation Chart is also included as an appendix to
volume one.
Volume Two covers the SM packages that contain repair procedures for selected
components of the vehicle. Each SM package is complete with its own Table of Contents. Any
requirement for tools and materials to perform each repair task is also listed.
TM 5-3810-307-24-2 - Diesel Engine Operation and Maintenance Manual. This manual also
consists of two volumes: Volume one is the Cummins operation and maintenance handbook
while volume two contains engine repair information. Each manual has been edited specifically
for the ATEC. Included are preventive maintenance, troubleshooting, adjustment/repair/
replacement specifications/torques values, and warranty data.
Change 1 v
