TM 5-3810-307-10
Table 5-1. Operator Preventive Maintenance Checks and Services - Continued
ITEM
ITEM TO BE
NOT FULLY
NO.
INTERVAL
CHECKED OR
PROCEDURE
MISSION
SERVICED
CAPABLE IF
b. Chattering,
b. Service brakes.
58g
BEFORE
Brakes, Service
grinding, or
Check/listen for noise
& Parking
inability to stop.
and stopping ability
(Continued)
with crane moving
slowly (in either
direction) when
depressing service
brake pedal.
Steering wheel binds
58h
BEFORE
Rear Axle
a. Ensure STEERING
or turns rough.
Steering
MODE CONTROL
handle is pulled out
and locked.
b. Ensure REAR AXLE
STEERING LOCK
switch is in the
UNLOCKED position.
c. Check steering wheel
for smooth and proper
operation.
d. Place REAR AXLE
STEERING LOCK
switch to LOCKED.
Front axle steering
58i
BEFORE
Front Axle
does not operate
Steering
WARNING
properly.
The steering wheel in
the carrier cab will turn
and could injure some-
one in the carrier cab.
To avoid injury and/or
damage, ensure any
restraining device on
the carrier steering
wheel is removed.
a. Steer front axle with
FRONT AXLE
STEERING switch.
Observe LEFT/
CENTER/RIGHT
indicators.
b. Return front axle to
center position.
Change 1 5-49
