TM5-3810-307-10
Table H-5. Pile Driver System Pre-Assembly Inventory Checklist (Continued)
√
No.
Qty.
Component Description
Ground Servicing Equipment Supplied with Pile Driver System (Cont'd)
42.
4
5/8 x 96-inch wire rope to attach the pile adapters to the impact hammer.
43.
8
5/8-inch cable clamps to attach the pile adapters to the impact hammer.
44.
1
Ground fueling hand pump with hose and quick connect fitting
45.
1
Ground oiling hand pump
46.
1
Ground oiling hose and quick connect fitting
47.
1
Ground oiling hand pump container cover
48.
1
Waste fuel drip tank drain hose and quick connect fitting
49.
1
Grease gun with flex hose
50.
1
Coupler for grease gun
51.
1
MIL-G-10924 grease
52.
1
Oil gun
53.
1
MIL-L-2105 oil
Ground Servicing Equipment Not Supplied with Pile Driver System
54.
1
External JP-8 or No. 2 diesel fuel source
55.
1
External MIL-L-2104, 15W40 oil source
56.
1
Kleen-Flo Tumbler Industries (Stock #789) Engine Storage/Fog Oil Spray or
equivalent
57.
1
Suitable container for catching fuel to bleed air from fuel lines and to drain waste fuel
drip tank.
Tools
58.
1
Hex key 3/4-inch (12-inch long)
59.
1
Hex key 5/8-inch (10-inch long)
60.
1
Hex key 1/2-inch (8-inch long)
61.
1
Hex key 3/8-inch (7-inch long)
62.
1
Hex key 5/16-inch (6-inch long)
63.
1
Wood pile tongs
64.
1
Crowbar (2-foot (61 cm))
65.
1
Two-pound (0.9 kg) hammer
66.
1
Vice grips
67.
1
12-inch (30.5 cm) adjustable wrench
68.
1
18-inch (46 cm) adjustable wrench
69.
1
1-5/16-inch combination wrench
70.
1
1-1/8-inch combination wrench
71.
1
1-5/16-inch box end wrench
72.
1
1-1/8-inch box end wrench
73.
1
Two-inch (5 cm) wood level
74.
1
100-foot (30.5 m) fiberglass measuring tape
Tools - Bundled Together
75.
1
Axe
76.
1
Ten-pound (4.5 kg) sledge hammer
77.
1
36-inch (91 cm) peavey
78.
1
Cheater bar (36 x 2-inch (91 x 5 cm))
79.
1
Steel bar w/ hickey (5-foot (1.5 m))
Accessories and Adapters
(to Drive Concrete, Sheet, or 10, 12, or 14-inch Steel H-beam and Wood Piles)
80.
1
18-inch square (concrete) pile adapter
81.
1
Sheet pile adapter
82.
1
10-inch (25.4 cm) guide plate
83.
1
12-inch (30.5 cm) guide plate
84.
1
16-inch (40.6 cm) guide plate
85
1
Plywood template for 18-inch square (concrete) pile adapter
Change 1
H-36
