TM 5-3810-307-24-1-1
(3)
Install flow divider valve (52) on bracket (62) with capscrews (51), washers (50), lockwashers (49),
and nuts (48).
(4)
If motor is not removed, install hydraulic tubes (32 and 33) on adapters (53 and 54) at valve (52) and
tee (45) and elbow (44) at rear of motor (43).
(5)
Connect hose (30) to tube (55) at front of valve (52).
e.
Install evaporator as follows:
(1)
Position evaporator assembly (68, Figure 2-1-8, Sheet 3) to brackets on rear interior wall of cab and
secure with washers (67), capscrews (66), washers (65), lockwashers (64), and nuts (63).
(2)
Connect refrigerant hoses (1 and 16) to right side of evaporator (68).
(3)
Connect electrical lead for evaporator (68).
(4)
If no other air conditioner components are removed, evacuate and charge air conditioner system
with 3.5 lbs of R-134a refrigerant and 5 oz. of refrigeration oil, refer to instructions for assigned
charging system and Appendix B.
2-1-62
