TM 5-3810-307-24-1-1
n.
Connect positive swing lock cable to positive swing lock mechanism at turntable gear.
o.
Route and connect seven hydraulic hoses exiting right side of cab and remove tags.
p.
Install superstructure wiring harness bracket and three cab wiring harness ground wires to right side of
cab.
q.
Connect four electrical connectors to superstructure wiring harness at bracket on right side of cab and
remove tags.
r.
Route and connect six air lines exiting right side of cab to swivel and remove tags.
s.
Install access cover on left turntable side plate.
t.
Install exterior rear access cover on cab
2-1-100
