TM 5-3810-307-24-1-1
(10) Apply LOCTITE 242 to threads of screw (19), hold head of screw (19), and tighten nut (18) to secure
adjustment bracket (23) in place.
(11) Apply LOCTITE 242 to threads of "LK" sensor, and tighten nuts (22 and 24) to hold sensor in place.
NOTE
After adjustments are made, the REAR STEER LOCK ENGAGED indicator
light should come on only when the axle is centered and the axle lock cylinder
is extended.
(12) Place REAR AXLE STEERING LOCK switch to the LOCKED position and ensure REAR STEER
LOCK ENGAGED indicator light comes on, and goes out when REAR AXLE STEERING LOCK
switch is placed in the UNLOCKED position.
(13) Start engine from carrier cab. Verify that REAR STEER DIRECTION center arrow indicator light is lit
(rear wheels centered). Position REAR AXLE STEERING toggle switch to RIGHT, ensure rear axle
wheels turn in direction shown on pictogram on right side of switch, center and left arrow indicator
lights are out, and right arrow indicator light comes on. Position toggle switch to LEFT, ensure rear
axle wheels turn in direction shown on pictogram on left side of switch, center and right arrow
indicator lights are out, and left arrow indicator light comes on.
(14) Position EMI shields (21) over sensors and secure in place with clamps (20).
2-4-19
