TM 5-3810-307-24-1-1
TAGLINE ASSEMBLY
Removal
a.
Mark position of tagline retainer (12, Figure 2-10-6) on hose reel hydraulic hoses (7) for installation
purposes.
WARNING
Hose reel is installed with a spring preload. Maintain tension on hoses
when disconnecting taglines so reel does not spin freely causing possible
damage to equipment or personal injury.
b.
Ensure hydraulic hoses (7) are secured to maintain tension on hose reel spring, and disconnect clips of
taglines (13) from stowage link on boom or attachment as applicable.
c.
Remove locknuts (8 and 10), capscrews (9 and 11), tagline retainer (12), and taglines (13) from hydraulic
hoses (7).
d.
If necessary, remove taglines (13) from tagline retainer (12).
Installation
a.
If removed, install taglines (13, Figure 2-10-6) on tagline retainer (12).
b.
Position tagline retainer (12) on hydraulic hoses (7) as marked during removal. If position is lost, install
retainer so that hydraulic hoses (7) have a small amount of slack when attachment is raised to highest working
position, but without excessive slack when attachment is lowered.
c.
Secure tagline retainer (12) on hoses (7) with capscrews (9 and 11) and locknuts (8 and 10).
d.
Attach clips of taglines (13) to stowage link on boom or attachment as applicable.
2-10-22
