TM 5-3810-307-24-2-1
90 to 95 mm Filter Wrench
Clean the area around the lubricating oil filter head.
Remove the filter. Clean the gasket surface of the filter
head.
NOTE
The O-ring can stick on the filter head. Make
sure it is removed before installing the new
filter.
Make sure the correct oil filter is used.
The filter for the six-cylinder engine is longer than the
filter for four-cylinder engines.
B = Standard for six-cylinder applications.
CAUTION
A 6 cylinder oil filter can be used on a 4
cylinder engine. Do not use a 4 cylinder oil
filter on a 6 cylinder engine. Use of a 4
cylinder oil filter on a 6 cylinder engine will
result in engine damage.