TM 5-3810-307-24-2-1
8 mm, 17 mm, and 19 mm
NOTE
If individual lines are to be replaced, remove
the support clamp from the set of lines
containing the line to be replaced.
Disconnect the line(s) from the injectors.
19 mm
Disconnect the line(s) from the fuel pump.
NOTE
If removed, reinstall the support clamp in the
original position and make sure the lines do
not contact each other or another
component. Install a protective cover on the
injectors and fuel delivery valves to prevent
the entry of dirt into the system.
Install the lines in the reverse order of removal.
Torque Value: (Line Fittings) 24 Nm [18 ft-lb]
(Support Clamp) 6 Nm [52 in-lb]
(Support Bracket) 24 Nm [18 ft-lb]
A-26 C-1