TM 5-3810-307-24-2-2
Apply a bead of Loctite 609 to the edge of the bushing
that will be installed to the rear of the bore. Apply the
Loctite to 270 degrees of the diameter of the bushing,
see the illustration. Use care to not apply Loctite near
to or in line with the oil hole.
Universal Bushing Installation Tool
Install the camshaft bushing flush with the block.
Be sure the oil hole is aligned.
A 3.2mm [0.126 in] diameter rod must be able to pass
through the hole.
Measure the installed camshaft bushing.
Camshaft Bushing Bore
mm
in
54.107
MIN
2.1302
54.146
MAX
2.1317
1-24
