TM 5-3810-307-24-2-2
Hammer
If previously removed, install the alignment pin until it
bottoms.
CAUTION
The gear will be permanently distorted if
overheated. The oven temperature should
never exceed 177C [350F].
Heat the crankshaft gear in a preheated oven for 45
minutes at 149 C [300 F].
Apply a thin coating of lubricant to the nose of the
crankshaft.
WARNING
Wear protective gloves to prevent personal
injury.
Install the hot gear up to the crankshaft shoulder with
the timing mark out.
1-28