TM10-3950-672-24-2
If no voltage is indicated at the S terminal. check:
Fuses
Voltage to the ignition switch
And, voltage to neutral safety switch and engine
safety shutoff system.
If the solenoid does make an audible sound, turn the
switch off and attempt to bar the engine in both
directions.
Bar the engine as follows:
1. Direction of engine rotation.
2. Direction opposite engine rotations.
3. Direction of engine rotation.
If the engine will bar at Step 3, attempt to start the
engine. If the starter cranks the engine, check the
starter pinion gear and flywheel ring gear for damage.
If the engine bars and the starting motor does not crank,
check the voltage between the solenoid and starting
motor. The ignition switch must be in the start position.
No Voltage: Starter is at fault
Normal Voltage: The solenoid is at fault
5-148