TM 10-3950-672-24-2
Reduce the dynamometer load until the engine speed
increases to the engine's rated RPM.
Operate the engine at rated RPM for 5 minutes.
Check all gauges and record the data.
Caution: Shutting off the engine Immediately after
operating at full load will damage the turbocharger
and Internal components. Always allow the engine
to cool before shutting it off.
Remove the dynamometer load completely, and operate
the engine at 700 RPM for 3 to 5 minutes. This period
will allow the engine components to cool.
Shut off the engine.
5-331