TM 10-3950-672-24-2
Inspect the voltage rating on the starting motor before
installing the electrical wiring.
Attach electrical wires to the starting motor and the
batteries, if used.
NOTE: If another method of starting the engine is used,
follow the manufacturer's instructions to make the
necessary connections.
Engine Dynamometer Test Engine Run-In (14-02)
The engine run-in period allows the tester to detect
assembly errors and to make final adjustments needed
for performance that meets specifications.
NOTE: The amount of time specified for the following
engine run-in phases are minimums. Additional time
can be used at each phase except engine idle periods,
if so desired.
Measurements from these indicators and gauges must
be observed closely during all phases of the engine run-
in period. Refer to page 5-320 for specifications and
acceptable readings.
5-327