Figure 4-36. Personnel or engine heater, disassembly and reassembly.
fuel strainers, and heater fuel pumps are described in
(1) Clean all metal parts with an approved
cleaning solvent and dry thoroughly.
(2) Clean all electrical parts with a rag
dampened in an approved cleaning solvent then dry
4-47. Heater Control Panel (Distribution Box)
thoroughly with a clean dry cloth.
a. Removal and Installation. Refer to view A of
(3) Visually inspect all parts for damage or
control panel from operator's compartment. Install in
(4) Repair by replacing damaged or defective
electrical lead, switch, circuit breaker, or indicator light.
b. Disassembly and Reassembly. Refer to view B
Replace all defective mounting hardware.
numerical sequence. Reassemble in reverse order.
c. Cleaning, Inspection, and Repair.