Figure 3-17. Turbocharger detail (sheet 4 of 10).
Figure 3-17. Turbocharger detail (sheet 6 of 10).
(13) Remove nozzle ring and clamp from turbine
d. Cleaning. Submerge all parts except bearings.
The parts should be agitated to do a satisfactory job, but
take special care that the parts are not allowed to strike
Caution: Never use a caustic solution
for cleaning as this will permanently
damage certain parts. Use only a
soft brush, plastic blade scraper, or
compressed air jet to remove
deposits. Never use a wire brush or
steel blade scraper for this purpose.
Note. Make sure all wheel blades
are thoroughly cleaned. Deposits
Figure 3-17. Turbocharger detail (sheet 5 of 10).
left on the blades will affect balance.