TM 10-1670-251-12&P
3-16.
Rope Snaphook (cont).
(b) Cut a 15-inch length of type II, nylon cord.
Remove core cords and sear ends.
(c) Cut a 5-inch length of 0.080-inch diameter
steel wire. Form safety pin (2).
(d) Pull cord halfway through loop in safety pin
(2).
(e
Tie cord to safety pin (2) with a square knot.
(f)
At a point 4 1/2 inch from first square knot,
tie a second square knot.
(g) Tie cord around snaphook (3), loop with
square knot and tie overhand knots in each
running end.
c.
Replace. Replace an unserviceable/unrepair-
able governor assembly with one from stock.
3-34
