TM 10-1670-251-12&P
3-16.
Rope Snaphook.
This task covers:
a. Inspect
b. Repair
c. Replace
Tools:
Materials/Parts (cont):
Knife, Item 2, Appendix B
Wire, Steel, 0.080-Inch
Shears, Item 6, Appendix B
Dia, Item 13, Appendix
D
Materials/Parts:
Equipment Condition:
Cord, Nylon, Type II, Item 2, Unpacked. Lowering
Appendix D
device with defects
recorded and clean.
a.
Inspect. Inspect the snaphook for cracks, and
insure spring-loaded closure is not deformed or
otherwise damaged. Insure that safety pin and lanyard
are not missing a and are in serviceable condition.
b. Repair.
(1) Replacing safety pin and lanyard. (figure 3-
7). Replace missing or damaged safety pin and/or
lanyard as follows:
(a) Remove original lanyard (1) from rope
snaphook. Discard lanyard (1) and safety pin (2).
3-32