TM 10-1670-295-23&P
2-24. Coupler Link
This task covers:
a.
Inspect
b.
Replace
Tools:
Equipment Condition:
Punch, Item 8, Appendix B
On work table.
Hammer, Item 17, Appendix B
a.
Inspect. Refer to paragraph 2-8 for inspection procedures.
b.
Replace. (figure 2-13).
(1)
Using punch remove pin (1) from coupling link (2).
(2)
Separate and remove the coupling link half (2) and spacer (3).
(3)
Remove chain from coupling link.
(4)
Remove remaining coupler link half (2).
(5)
Install new coupler link half (2) on grabhook (4).
(6)
Attach chain to new coupler link half.
(7)
Position spacer (3) and remaining half of coupler (2), and slide pin (1) into place on grabhook
(4).
Figure 2-13. Coupler Link Replacement.
2-26
