5-10. Camshaft and Bearings
(3) Remove oil pump (para 5-6).
a. Removal.
(4) Remove camshaft and bearings illustrated
(1) Remove valves (para 5-7).
in figure 5-11.
(2) Remove timing gears (para 5-4).
1. Front bearing
4 Rear bearing
2 Front intermediate bearing
5 Camshaft
3 Rear intermediate bearing
Figure 5-11. Camshaft and bearings, exploded view.
b. Cleaning and Inspection.
journals at several places on the journals. The
front journal should be 1.8715-to 1.8725-
(1) Clean all parts.
journals at several
inches. The front intermediate journal should
(2) Inspect for obvious damage and other
be 1.8085-to1.8095-inches.
The rear
defects.
Replace defective parts as
intermediate journal should be 1.7457-to
necessary.
1.7465-inches. The rear
(3) Measure diameter of camshaft bearing
5-13
