CHAPTER 2
GENERAL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
repair parts are listed and illustrated in TM 5-3810-201-
2-1. Special Tools and Equipment
35P.
The special tools required to perform direct support,
2-3.
Specially Designed (Fabricated) Tools and
general support and depot maintenance on the crane-
shovel basic unit are listed in tables 2-1, 2-2, and in
Equipment
appendix C of TM 5-3810-201-12. References and
illustrations indicating the use of these tools are listed in
The specially designed tools and equipment illustrated in
the table. No special equipment is required by direct
support, general support, or depot maintenance
for general support maintenance personnel performing
personnel for performing maintenance on the crane-
maintenance on the engine model D333TA. The tools
shovel basic unit.
and equipment listed in table 2-3 are not available for
issue, but must be fabricated by qualified general
2-2.
Direct Support, General Support, and Depot
support maintenance personnel.
Maintenance Repair Parts
Direct and general support and depot maintenance
Figure 2-1. Specially designed (fabricated) tools (sheet 1of 7).
AGO 20051A
2-1
