1
Oil pan
6
Plate
2
Gasket
7
Capscrew
3
Gasket
8
Capscrew
4
Lockwasher
9
Capscrew
5
Capscrew
Figure 3-48. Oil pan and plate, exploded view.
(3) Repair by straightening bends, welding
b. Cleaning, Inspection, and Repair.
Clean,
cracks or breaks, or replacement.
inspect, and repair oil pan and plate in manner described
in paragraph 3-48c above.
3-44. Oil Pan and Plate for Engine Model D333TA
3-45. Oil Pump and Pressure Relief Valve (Engine
a. Removal and Installation.
Model 687-18-ES)
(1) Remove engine (para 2-9).
(2) Remove capscrews (7, 8, and 9, fig. 3-
a. Removal and Installation.
(1) Remove oil pan (para 3-43).
(2) Remove retaining ring (15, fig. 3-39) from
(3) Remove capscrews (5), lockwashers (4),
gear (14).
plate (6) and gasket (8).
(3) Use a puller and remove gear (14) from oil
pump shaft.
NOTE
(4) Remove two capscrews (8 and 5, fig. 3-
(5) Remove elbow (4) and pipe (6) from oil
Winterized models will have tube and
pump and strainer (10).
adapters similar to those shown in
(6) Remove four capscrews (9), lockwasher
(2), and oil pump and strainer (10) from crankcase (18).
(7) Install oil pump and strainer by reversing
(4) Install oil pan and plate by reversing the
the procedures in steps (1) through (6) above.
procedures in steps (1) through (8) above.
b. Disassembly and Rea8sembly.
(1)
Remove lockwire (26, fig. 3-50),
three
AGO 20051A
3-59
