solvent and dry thoroughly.
b.
For Engine Model D333TA.
(2) Visually inspect all hardware for burred
(1) Removal and Installation. Refer to view
or stripped threads, test that flexible control pulls
A of figure 3-54 and remove items in numerical
through housing easily (does not bind), and that knob is
sequence. Install in reverse order.
serviceable.
(2) Disassembly and Reassembly. Refer to
(3) Repair by replacing defective hardware
view B of figure 3-54 and disassemble the primer pump
of flexible control.
in numerical sequence. Reassemble in reverse order.
(3) Cleaning, Inspection and Repair.
3-73. Blower Adapters (For Engine Model 687C-18-
(a) Clean all parts in an approved
ES)
cleaning solvent and dry thoroughly.
(b) Visually inspect for burred threads,
a.
Removal and Installation. Refer to figure 3-
weak springs, damaged seals, and bent or clogged fuel
56 and remove blower adapters. Install in re verse
lines (tubes).
order.
(c) Repair by replacing defective
b.
Cleaning, Inspection, and Repair.
items.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
3-72. Engine Shutoff Control
(2) Visually inspect all parts for dents,
cracks, excessive wear, or other defect Inspect gaskets
a.
Removal and Installation. Refer to figure 3-
and hose for deterioration or other defect.
55, remove items in numerical sequence, and remove
Inspect mounting hardware for burs, stripped
engine shutoff control. Install in reverse order.
threads, or other defect.
b.
Cleaning, Inspection, and Repair.
(3) Repair
by
replacing
defective
(1) Clean all parts in an approved cleaning
component or mounting hardware.
Figure 3-22. Engine shutoff control, removal and installation.
3-66
