TM 5-3810-207-20/TO 36C23-3-37-12
Figure 198. Carrier cab operator's door, removal and installation.
(2)
Remove the engine hood and side panel
as instructed on figure 200.
b.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the hood panels for cracks or
dents. Pound out dents and weld all
cracks as necessary.
(3)
Repair or replace damaged parts as
necessary.
c.
Installation.
(1)
Install the engine hood and side panel as
illustrated on figure 200.
(2)
Install the battery box and cables (par.
209).
322. Right-Front Fender
a.
Removal.
(1)
Remove the battery box (par. 209).
(2)
Remove the engine hood and side panel
(par. 321).
(3)
Remove the sand shield (par. 320).
(4)
Remove
the
right-front
fender
as
instructed on figure 201.
b.
Cleaning, Inspection, and Repair.
(1)
Clean all parts with an approved cleaning
solvent.
(2)
Inspect the fender for damage. Replace a
damaged fender.
257
