TM 5-3810-207-20/TO 36C23-3-37-12
Figure 2. Crane-shovel and tiedown, removal.
(2)
When the crane-shovel is received with
new. dry-charge batteries and electrolyte
is
packed
separately,
perform
the
following services:
(a)
Remove the battery box cover and
filler caps (TM 5-4810-207-10).
(b)
Pour electrolyte into each battery
cell to a depth of 3/8 inch above the
separators.
(c)
Install the fillercaps and battery box
cover (TM 5-3810-207-10).
Caution:
Exercise
care
when
filling
the
batteries with electrolyte to prevent
splashing or spilling the acid on
clothing and body.
Note.
The carrier and crane batteries are
serviced in the sane manner.
(3)
When the crane-shovel is received with
wet batteries, service the batteries (TM 5-
3810-207-10). For information on battery
test and maintenance, refer to TM 9-6140-
200-15.
(4)
When the crane-shovel is received in cold
weather, fill the crane and carrier engine
cooling systems with antifreeze solution to
protect the system to the lowest expected
temperature. Refer to table I and TB
ENG-60 as a guide.
12
