Figure 2. Crane engine assembly, removal and installation.
(6) Disconnect the throttle linkage (TM
46. Carrier Engine Assembly
53810-207-20).
a. Removal.
(7) Remove the oil pan heating wire (TM
(1) Drain the cooling system (TM 5-3810-207-
53810-207-20).
10).
(8) Remove the hydraulic steering oil pump
(2) Remove the engine hood (TM 5-3810-
(TM 53810-207-20).
207-20).
(9) Remove the engine priming pump lines
(3) Disconnect the battery cable (TM5-3810-
(TM 53810-207-20).
207-20).
(10) Remove the engine back panel (TM 5-
(4) Disconnect the fuel line (TM 5-3810-207-
3810-207-20).
20).
(11) Remove the air cleaner, duct, and shroud
(5) Disconnect the clutch linkage (TM5-3810-
(TM 5-3810-207-20).
207-20).
TACO 5080A
30
