(TM 5-3810-207-20).
(13) Disconnect the air compressor lines (TM
5-3810-207-20).
(14) Disconnect the transmission housing
control rods (TM 5-3810-207-20).
(15) Remove the transmission assembly (par.
(16) Remove the carrier engine assembly as
instructed on figure 3.
b. Installation.
(1) Install the carrier engine assembly as
illustrated on figure 3.
(2) Install the transmission assembly (par.
(3) Connect the transmission housing control
rods (TM 5-3810-207-20).
(4) Connect the air compressor lines (TM 5-
3810-207-20).
543810-207-20).
(6) Install the air cleaner, clutch, and shroud
(TM 5-3810-207-20).
(7) Install the engine back panel (TM 5-3810-
207-20).
(8) Install the engine priming pump lines (TM
5-3810-207-20).
(9) Install the hydraulic steering oil pump (TM
5-3810-207-20).
(10) Install the oil pan heating wire (TM 5-
3810-207-20).
(11) Connect the throttle linkage (TM 5-3810-
207-20).
(12) Connect the clutch linkage (TM 5-3810-
207-20).
(13) Connect the fuel line (TM 5-3810-207-20).
(14) Connect the battery cables (TM 5-3810-
207-20).
(15) Install the engine hood (TM 5S810-207-
20).
(16) Fill the cooling system (TM 5-3810-207-
10).
A. Engine front mount, Installed view
B. Engine rear mount, installed view
Figure 3. Carrier engine assembly, removal and
installation.
TAGO 6080A
31
