Figure 29. Carrier engine carburetor screen service.
(3) Install the flange and air cleaner hose
(1) Clean all parts with an approved cleaning
solvent and dry thoroughly.
(2) Inspect all parts for defective condition.
87. Engine Governor
(3) Repair or replace damaged parts as
a. Removal. Remove the governor as instructed in
necessary.
b. Cleaning and Inspection.
89. Accelerator Linkage and Controls
a. Removal. Tag, disconnect, and remove the carrier
(1) Clean all parts with an approved cleaning
engine accelerator linkage and carburetor controls in
solvent and dry thoroughly.
numerical sequence as shown in figure 34.
(2) Inspect all parts for damage or defective
b. Cleaning, Inspection, and Repair.
condition.
(1) Clean all parts with an approved cleaning
(3) Replace a defective governor.
solvent and dry thoroughly.
c. Installation and Adjustment. Install and adjust
(2) Inspect all parts for defective condition.
the governor as illustrated in figure 82, so engine
operates at 2,800 rpm at full throttle.
(3) Repair or replace damaged parts as
necessary.
88. Fuel Pump
c. Installation. Install and connect the carrier engine
a. Removal and Installation. Remove and in,-tall
accelerator linkage in reverse order of the numerical
the carrier engine fuel pump as instructed in figure 33.
sequence shown in figure 34.
b. Cleaning, Inspection, and Repair.
AGO 6819A
77
