Figure 16. Front wheel, removal and installation.
226. Rear Wheel
(2) Remove the axle shaft, wheel bearings,
drum, and hub in the numerical sequence as
a. Removal.
Remove the rear wheels as
instructed on figure 139.
instructed on figure 138.
b. Cleaning and Inspection.
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
(1) Clean the rear wheels with an approved
solvent.
cleaning solvent.
(2) Inspect the wheel bearings and races for
(2) Inspect the rear wheels for bent condition
excessive wear and other damage (TM 9-
and other damage. Replace rear wheels
214).
as necessary.
(3) Inspect all other parts for breaks, excessive
c. Installation. Install the rear wheels as illustrated
wear, and other damage.
Replace all
on figure 138.
defective parts as necessary.
c. Installation.
227.
Rear Wheel Borings, Drum, Hub, and Axle
Shaft
(1) Pack the bearings using the prescribed
lubricant (LO 5-3810-227-15).
a. Removal.
(1) Remove the rear wheel (para. 226).
AGO 6819A
155
