c. Check adjustment through full travel of the
steering wheel.
219. Steering Wheel
a. Removal.
(1) Remove the horn button assembly (para.
(2) Remove the steering wheel as instructed
on figure 132.
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
solvent.
(2) Inspect all parts for breaks, cracks, and
Figure 130. Carrier steering pump relief valve,
other damage.
removal and installation.
c. Installation.
(1) Install the steering wheel as illustrated on
b. Cleaning and Inspection.
(1) Clean all parts of the relief valve with an
(2) Install the horn button assembly (para.
approved cleaning solvent.
(2) Inspect all parts for corrosion, breaks,
excessive wear, and other damage,
220. Drag Link
Replace defective parts.
c. Installation. Install the relief valve as illustrated
a. Removal. Remove the drag link assembly as
on figure 130.
instructed on figure 133.
b. Cleaning and Inspection
217. Steering Valve
(1) Clean all parts with an approved cleaning
solvent.
a. Removal.
Remove the steering valve as
(2) Inspect all parts for bends, breaks,
instructed on figure 131.
excessive wear, and other damage.
b. Cleaning and Inspection.
Replace defective parts as necessary.
(1) Clean all parts with an approved cleaning
c. Installation. Install the drag link assembly as
solvent.
illustrated on figure 133.
(2) Inspect the steering. valve for leaks and
proper operation.
Replace defective
221. Steering Arm
valve.
(3) Inspect the hose for frayed, cracked or
a. Removal.
broken condition.
Replace defective
(1) Remove the drag link (para. 220).
hoses.
(2) Remove the steering arm as instructed on
c. Installation.
Install the steering valve as
illustrated on figure 131.
b. Cleaning and Inspection.
218. Steering Assembly Backlash Adjustment
(1) Clean all parts with an approved cleaning
solvent.
(2) Inspect all parts for breaks, cracks or
a. To adjust steering assembly backlash, loosen,
other damage. Replace defective parts
locknut (fig. 131) and tighten side cover adjusting screw
as necessary.
until a very slight drag is felt when moving the steering
wheel through mid-position.
c. Installation.
b. Hold the adjusting screw and tighten locknut.
(1) Install the steering arm as illustrated on
(2) Install the drag link (para. 220).
AGO 6819A
151
