(2) Secure the lines and airhoses to the
(2) Remove the front and rear brake chambers
carrier frame with the clamps and screws.
as instructed on figure 142.
b. Cleaning and Inspection.
233. Air Pressure Gage
(1) Clean all parts with an approved cleaning
solvent.
a. Removal. Remove the air pressure gage as
(2) Inspect the brake chamber for proper working
instructed on figure 57.
condition.
Replace a defective brake
b. Cleaning and Inspection.
chamber as necessary.
(1) Clean all parts with an approved cleaning
(3) Inspect brake chamber and hose for cracks,
solvent.
holes, and deterioration of hose.
(2) Inspect the air pressure gage for cracked
(4) Replace all defective parts as necessary.
or broken glass. Replace as necessary.
c. Installation.
(3) Inspect the air pressure gage for proper
(1) Install the front and rear brake chambers as
operation. Replace an inoperative air
illustrated on figure 142.
pressure gage.
(2) Connect the brake chamber rod to the slack
(4) Inspect all mounting hardware for stripped
adjuster (para. 241).
or damaged threads.
Replace as
necessary.
c. Installation. Install the air pressure gage as
235. Quick Release Volvo
illustrated on figure 67.
a. Removal. Remove the quick release valve as
instructed on figure 148.
234. Front and Rear Brake Chambers
b. Cleaning and Installation.
a. Removal.
(1) Clean the quick release valve with an
(1) Disconnect the brake chamber rod from
approved leaning solvent.
slack adjuster (para 241).
Figure 142. Front and rear break chambers, removal and installation.
AGO 6819A
162
