TM 5-3810-231-12
b. Cleaning, Inspection and Repair.
126.
Air Pac Assemblies
(1) Clean regulating valve with a cloth
dampened with an approved cleaning
solvent.
a. Removal.
Remove air-pac assemblies as
(2) Inspect regulating valve for cracks,
instructed on figure 74.
breaks, stripped threads and other
b. Cleaning, Inspection and Repair.
damage.
Replace a damaged or
(1) Clean exterior with a cloth dampened with
defective regulating valve.
an approved cleaning solvent and dry
c. Installation. Install the pressure regulating valve
thoroughly.
as instructed on figure 74.
(2) Inspect for cracks, breaks, stripped
threads and other damage. Replace a
defective air-pac.
Figure 74. Air system controls, valves and gages, removal and installation.
102
