Section VII. RADIO INTERFERENCE SUPPRESSION
4-13.
General Methods Used to Attain Proper
Suppression
Essentially, suppression is attained by providing a low
resistance path to ground for the stray currents. The
methods used include shielding the ignition and high-
straps.
4-14.
Interference Suppression Components
Suppression components are those whose function is to
suppress radio interference. These components are
described and located in figure 4-2.
4-15. Replacement of Suppression Components
Refer to figure 4-2 for replacement of suppression
components.
Figure 4-2 . Interference suppression components,
location and removal.
Section VIII. MAINTENANCE OF EXHAUST SYSTEM
(2) Inspect for cracks, breaks, or other
4-16. Carrier Engine Exhaust Assembly (Model 2380)
damage.
a. Removal.
Remove exhaust assembly as
Replace all defective parts.
illustrated in figure 4-3.
c. Installation.
Install
exhaust
assembly
as
b. Cleaning and Inspection.
illustrated in figure 4-3.
(1) Clean exhaust assembly with a wire brush.
4-8
