b. Cleaning, Inspection and Replacement.
illustrated in figure 4-26.
(2) Install fuel tank as illustrated in figure 4-25.
(1) Clean, being sure to remove all sludge,
deposits and water (TB ORD 1031).
(2) Inspect for damage and leaks.
4-35. Fuel Inlet and Drain Connectors
(3) Replace defective parts.
a. Service.
c. Reassembly ad Installation.
(1) Remove inlet screen from each inlet fuel
(1) Reassemble fuel tank, lines, and fittings as
connector as illustrated in figure 4-27.
4-35
