(2) Remove batteries and cables.
d. Replacement (Model 2380).
(3) Remove battery box (fig. 4-53).
(1) Replace battery that will not hold or take a
c. Cleaning and Inspection (Model 2380).
charge.
(1) Remove corrosion from battery terminals,
(2) Replace damaged cables.
cables, and box.
(3) Replace a damaged battery box.
(2) Use water to wash sides and top of battery.
e. Installation (Model 2380).
(3) Clean vent openings in filler caps.
(1) Install battery box (fig. 4-53).
(4) Clean cables and-battery box.
(2) Install batteries and cables.
(5) Inspect batteries for cracks, leaks, broken
(3) Install battery hold-down brackets, battery box
terminals or other defects.
inner cover and top plate.
(6) Inspect cables for defective insulation or broken
f. Removal (Model 2385). Refer to figure 4-54 and
strands and terminals.
remove batteries.
(7) Inspect battery box for cracks or other dam-age.
Figure 4-54. Carrier battery box, batteries and cables,
removal and installation ({model 2885).
4-61
