c
Cleaning and Inspection.
(1) Install boom on revolving frame (para 24).
(1) Clean all parts and dry thoroughly.
(2) Install reeving (para 2-2).
(2) Inspect boom for broken welds, bends, an other
4-113. Bridle Assembly
damage. Replace all defective parts.
a.. Removal Remove bridle assembly from crane
d. Reassembly. Reassemble boom as illustrated i
boom by reversing installation procedure (para 2-2).
b. Disassembly. Disassemble bridle assembly as
e.. Installation.
illustrated in figure 4-100.
Figure 4-100. Bridle assembly, disassembly and reassembly.
4-105
