c.
Installation.
(3) If necessary to remove the baseplate, be
careful not to lose the steel spacers between the plate
(1) Install the base plate and torque the %3 inch
and the axle housing. Note the different lengths of the
capscrews to 370 ft.-lb., torque the 5/8 inch capscrews to
capscrews for proper reinstallation.
225 ft.-lbs.
b. Inspection and Repair. Inspect fender and
(2) Install the fender bracket by sliding fender up
bracket for dents, breaks, or other damage. Repair by
over tire and secure to bracket with screws, lockwashers
welding, straightening or replacement of components.
and nuts.
Section XXVIII. CARRIER CAB AND COMPONENTS
manner as the door window and windshield glass in the
4-147. General
crane (para 4-117).
b. Installation. This glass is installed in the same
The carrier cab is mounted on the left-front side of the
manner as the door window and windshield glass in the
carrier frame. It is designed to accommodate only the
crane (para 4-117).
driver. The top portion can be removed as a complete
unit.
4-149. Side Window Glass
4-148. Windshield, Small Side and Rear Window
a. Removal.
Remove side window glass as
Glass
instructed in figure 4-133.
a. Removal. This glass is removed in the same
4-134
