b. Cleaning, Inspection, and Repair.
(3) Repair dents.
(1) Clean all parts. Use soap and water for
(4) Replace broken or cracked hinges,
cleaning cushions.
handles and glass as required. Glass is removed and
(2) Inspect cushions for torn or ripped covers
replaced as follows:
(a) Remove the inside door and window
and broken springs. Replace damaged cushions.
(3) Inspect seat frame and suspension for
handles.
(b) Remove the inner panel.
cracks and bends. Straighten bends and weld cracks.
(4) Replace damaged seat.
(c) Remove and replace glass in
c. Installation. Install carrier cab seat as illustrated
channel.
(d) Install inner panel and handles.
c. Installation. Install carrier cab door as illustrated
4-151. Cab Operator's Door
a. Removal. Remove carrier cab door as instructed
4-152. Windshield Wiper Motor
a. Removal and Disassembly.
(1) Remove windshield
wiper
motor
as
illustrated in figure 4-136.
Figure. 4-136. Windshield wiper motor, and installation.
(2) Disassemble motor as illustrated in figure
4-137.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts and dry thoroughly.
(2) Inspect for cracks or other defects.
(3) Repair by replacing damaged or defective
parts.
c. Reassembly and Installation.
Figure 4-135. Carrier cab door, removal and installation.
(1) Reassemble motor as illustrated in figure
4-137.
(2) Install motor as illustrated in figure 4-136.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts.
(2) Inspect door for dents, and broken parts.
4-137
